Yamaha DVD-S659BL - Manual (Page 13)

9 En
English
Connections
HDMI jack
Connect the HDMI output jack of this unit
to an HDMI input jack of your TV using a
commercially available HDMI cable.
You need to set “HDMI AUDIO” (see
page 26) and “HDMI VIDEO” (see page 30).
Notes:
– You need to make an appropriate audio
connections if the connected component
does not output audio signals (see “Audio
connections” on page 7).
– This unit is not compatible with HDCP-
incompatible HDMI or DVI components.
– You need a commercially available HDMI/
DVI conversion cable when you connect this
unit to other DVI components. In this case,
the HDMI jack of this unit does not output
any audio signals.
– Depending on the connected DVI
component, black and white in the image
may not be distinct. In that case, adjust the
picture setting of the connected DVI
component.
– When connecting an HDMI component,
refer to the instruction manual for the
component.
– Do not disconnect or turn off the power of
the HDMI/DVI component connected to
the HDMI jack of this unit while data is
being transferred. Doing so may disrupt
playback or cause noise.
HDMI connections
HDMI IN
HDMI
This unit
TV
HDMI cable
00EN_DVD-S659_U.book Page 9 Monday, June 12, 2006 4:19 PM