Yamaha RX-V2700 - Manual (Page 90)

88
En
GRAPHIC USER INTERFACE (GUI) SCREEN
■ Multi CH Assign
(Multi channel assignment)
Use this feature to set the direction of the signals input
into the center, subwoofer and surround channels when a
source component is connected to the MULTI CH INPUT
jacks. If you input 8-channel signals from an external
decoder, use this feature to select jacks for the additional
front signals.
Input Channels (Input channels)
This setting is used to select the number of channels input
from an external decoder.
Choices:
6ch , 8ch
If “Zone2 Amplifier” (page 104) is set to “INT:[SP1]”,
“INT:[SP2]” or “INT:Both”, no sound is output from the surround
back speakers even if you select “8ch”. In this case, select “6ch”
and set the output setting of the external component to 6 channels.
Front Input (Front input)
If you selected “8ch” in Input Channels, you can select
analog jacks at which front signals from an external
decoder will be input.
Choices:
DVD , DTV, CBL/SAT, VCR1, DVR/VCR2,
V-AUX, CD, CD-R, MD/TAPE
■ BGV (Back ground video)
Use this feature to select the video source played in the
background of the sources input from the MULTI CH
INPUT jacks.
Choices: DVD, DTV, CBL/SAT, VCR 1, DVR/VCR 2,
V-AUX, Last , Off
• Select “Last” to set this unit to automatically select the
last selected video source as the background video
source.
• Select “Off” to set this unit not to play the video source
in the background.
Use this menu to adjust the sound parameters.
1
Set the operation mode selector to AMP and
then press SET MENU on the remote control.
2
Press k / n on the remote control to select
“Manual Setup” and then press h .
3
Press k / n / l / h on the remote control to
select “Sound” and then press h .
4
Select the desired parameters and then press
h to access and adjust.
Note
Input Channels
Front Input
Multi CH Assign
Rename
Volume Trim
BGV
V-AUX
DVR/VCR 2
Last
Off
BGV
Multi CH Assign
Rename
Manual Setup (Sound)
MENU
SRCH MODE
SET MENU
TV
SOURCE
AMP
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
Dynamic Range
LFE Level
Tone Control
Audio Option
Parametric EQ Sound
Video
Basic
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER