Yamaha RX-V2700 - Manual (Page 100)

98
En
GRAPHIC USER INTERFACE (GUI) SCREEN
Bass Out (Bass out)
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
Choices:
Both , SWFR, Front
• Select “Both” (both) if you connected a subwoofer.
The low-frequency signals of any source are output
from the subwoofer. The LFE signals as well as the
low-frequency signals of other speakers set to “Small”
are directed to the subwoofer. The low-frequency
signals of the front left and right channels are directed
to the front left and right speakers and the subwoofer
regardless of the “Front” setting (see page 98).
• Select “SWFR” (subwoofer) if you connected a
subwoofer. The LFE signals as well as the low-
frequency signals of other speakers set to “Small” are
directed to the subwoofer.
• Select “Front” (front) if you did not connect a
subwoofer. The LFE signals, the low-frequency signals
of the front left and right channels, and the low-
frequency signals of other speakers set to “Small” are
all directed to the front left and right speakers
regardless of the “Front” setting (see page 98).
Bass Cross Over (Bass cross over)
Use this feature to select the crossover frequency of all the
speakers set to “Small” or to “None” in “Speaker Set” (see
pages 96 and 97). All frequencies below the selected
frequency will be sent to the subwoofer or to the speakers
set to “Large” in “Speaker Set” (see pages 96 and 97).
Choices: 40 Hz, 60 Hz,
80 Hz , 90 Hz, 100 Hz, 110 Hz,
120 Hz, 160 Hz, 200 Hz
SWFR Phase (Subwoofer Phase)
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices:
Normal , Reverse
• Select “Normal” if you do not want to reverse the
phase of your subwoofer.
• Select “Reverse” to reverse the phase of your
subwoofer.
PR/SB Priority
(Presence/surround back speaker priority)
Use this feature to prioritize either the presence or the
surround back speakers when playing sources that contain
surround back channel signals using the CINEMA DSP
sound field programs.
Choices: Presence,
Surround Back
• Select “Presence” to use the presence speakers even
when surround back channel signals are input. The
signals for the surround back channel will be output
from the surround speakers.
• Select “Surround Back” to use the surround back
speakers when surround back channel signals are
detected in a CINEMA DSP program. The presence
channel signals are output from the front speakers.
Notes
Both
SWFR
Front
Surround Back
Presence
Bass Out
Bass Cross Over
SWFR Phase
60Hz
40Hz
80Hz
90Hz
100Hz
Presence
Bass Out
Bass Cross Over
SWFR Phase
PR/SB Priority
Normal
Reverse
Bass Out
Bass Cross Over
PR/SB Priority
SWFR Phase
Bass Cross Over
SWFR Phase
PR/SB Priority Surround Back
Presence