Yamaha RX-V2700 - Manual (Page 48)

SOUND FIELD PROGRAMS
46
En
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field
processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.
y
• When you set the “Decoder Mode” parameter in “Input Select” to “Auto”, this unit selects the appropriate digital decoder according to
the input signal.
• The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources.
• The YAMAHA HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in
actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from
the front, back, left and right.
• You can select sound field programs and adjust the parameters by using the GUI screen. See page 79 for details.
• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.
• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input
source (see page 43) and Audio input jack select is set to “ANALOG” (see page 42).
• When you play back DSD sources with any sound field program, this unit converts the DSD signals to PCM signals and then applies
the selected program.
• When you play back DTS 96/24 sources with any sound field program, this unit applies the selected program without activating the
DTS 96/24 decoder.
• Sampling frequencies higher than 48 kHz are sampled down to 48 kHz or lower and then sound field programs are applied.
y
You can select the desired sound field programs and setting the parameters by using GUI screen. See page 79 for details.
■ Front panel operations
Rotate the PROGRAM selector on the front panel.
The name of the selected sound field program appears in
the front panel display and in the short message display.
■ Remote control operations
Set the operation mode selector to AMP and then
press one of the sound field program selector
buttons on the remote control repeatedly.
The name of the selected sound field program appears in
the front panel display and in the short message display.
SOUND FIELD PROGRAMS
Selecting sound field programs
Notes
ON/OFF
MASTER
PURE DIRECT
VOLUME
MAIN ZONE
INPUT
ON OFF
ENHANCER NIGHT
ZONE ON/OFF ZONE CONTROLS
MODE TUNING PRESET/TUNING
EDIT
MULTI ZONE
FM/AM PRESET/
TUNING MAN'L/AUTO FM MEMORY
MIC OPTIMIZER
EFFECT
STRAIGHT
CONTROL SELECT AUDIO TONE REC OUT/ ZONE2 A/B/C/D/E
PROGRAM
YPAO
ZONE 3
R L OPTICAL
USB
ZONE 2
AUDIO
VIDEO AUX
SILENT CINEMA S VIDEO VIDEO
PHONES
PROGRAM selector
VOLUME CH TV VOL
EFFECT
STRAIGHT
MEMORY
A/B/C/D/E
SRCH MODE
PURE DIRECT PRESET/CH SET MENU
BAND
LEVEL
ENHANCER
STEREO SUR. DECODE SELECT EXTD SUR.
CLASSICAL LIVE/CLUB ENTERTAIN MOVIE
NIGHT MEMORY 1 2
TV
SOURCE
AMP
–
2
+ +
– –
+
ENTER
DISPLAY
AUDIO
MENU TITLE
TV MUTE TV INPUT MUTE
4 3
ENT + 10 0 9
5
1
7 6 8
RETURN
AMP
Sound field program
selector buttons