Yamaha RX-V2700 User Manual
Page 11
CONTROLS AND FUNCTIONS
9
En
INTR
ODUCTION
English
NET RADIO
Selects the Internet radio as the sub input source of
NET/USB.
USB
Selects a USB memory device or a USB portable
audio player as the sub input source of NET/USB.
• Press NET/USB to select “NET/USB” as the input source
before you press any of the network and USB input selector
buttons stated above to select the corresponding sub input
source of NET/USB.
• When you press any of the network and USB input selector
buttons, the contents previously played for the corresponding
sub input source of NET/USB is automatically played.
B
MACRO ON/OFF
Turns on or off the macro function (see page 115).
C
MACRO
Programs a series of operations to be controlled with a
single button (see page 115).
D
STANDBY
Sets the main zone to the standby mode (see page 34).
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
E
POWER
Turns on the main zone (see page 34).
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
F
AUDIO SEL
Toggles the priority for the type of audio input jack
between “AUTO”, “HDMI”, “COAX/OPT” and
“ANALOG” when one component is connected to two or
more input jacks (see page 42).
G
SLEEP
Sets the sleep timer (see page 45).
H
SELECT
k
/
n
Selects another input source that you can control
independently of the input source selected with the input
selector buttons.
I
Operation mode selector
Selects the operation mode of the remote control buttons
in the shaded area.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates the component selected with an input
selector button (see page 110).
TV
Operates the TV assigned to either DTV or PHONO
(see page 109).
• To set the remote control codes for other components, see
• When you set the remote control codes for both DTV and
PHONO (see page 111), priority is given to the one set for
DTV.
J
VOLUME +/–
Increases or decreases the volume level.
K
MUTE
Mutes the audio output. Press again to restore the audio
output to the previous volume level (see page 43).
L
PURE DIRECT
Turns on or off the pure direct mode (see page 52).
M
SET MENU
Activates the GUI screen (see page 44).
N
STRAIGHT
Turns the sound field programs off or on. When the
“STRAIGHT” mode is selected, 2-channel or multi-
channel input signals are output directly from their
respective speakers without effect processing (see
page 51).
O
EXTD SUR.
Switches between 5.1 and 6.1/7.1-channel playback of
multi-channel sources (see page 75).
P
SELECT
Selects decoders for 2-channel sources (see pages 75 and
76).
Q
ENHANCER
Turns on or off the Compressed Music Enhancer mode
(see page 54).
R
NIGHT
Turns on or off the night listening modes (see page 55).
S
RENAME
Changes the name of the input source in the display
window (see page 114).
T
CLEAR
Clears remote control functions acquired from the learn,
macro and/or rename features (see page 118).
U
LEARN
Programs remote control codes of functions from other
remote controls (see page 113).
Notes
Note
Note
Notes