Yamaha RX-V2700 - Manual (Page 8)

CONTROLS AND FUNCTIONS
6
En
This section describes only the amplifier controls and functions of this unit. See the following pages for details about
other control and functions.
• AM/FM tuning .......................................... see page 56
1 MASTER ON/OFF
Turns this unit on or off (see page 34).
2 MAIN ZONE ON/OFF
Turns on the main zone or sets it to the standby mode
(see page 34).
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control.
• When you turn on this unit, there will be a 4 to 5-second delay
before this unit can reproduce sound.
• This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.
3 INPUT selector
Selects the desired input source (see page 40).
4 AUDIO SELECT
Toggles the priority for the type of audio input jack
between “AUTO”, “HDMI”, “COAX/OPT” and
“ANALOG” when one component is connected to two or
more input jacks (see page 42).
5 TONE CONTROL
Adjusts the bass/treble balance of the front left, front right
and center channels in conjunction with the PROGRAM
selector (see page 52).
6 REC OUT/ZONE2
Selects the input source you want to direct to the audio/
video recorder and Zone 2 outputs independently of the
input source you are listening to or watching in the main
zone (see page 74).
7 STRAIGHT
Turns the sound field programs off or on. When the
“STRAIGHT” mode is selected, 2-channel or multi-
channel input signals are output directly from their
respective speakers without effect processing (see
page 51).
CONTROLS AND FUNCTIONS
Front panel
ON/OFF
MASTER
PURE DIRECT
VOLUME
MAIN ZONE
INPUT
ON
OFF
ENHANCER NIGHT
ZONE ON/OFF ZONE CONTROLS
MODE TUNING PRESET/TUNING
EDIT
MULTI ZONE
FM/AM PRESET/
TUNING MAN'L/AUTO FM MEMORY
MIC
OPTIMIZER
EFFECT
STRAIGHT
CONTROL SELECT AUDIO TONE REC OUT/ ZONE2 A/B/C/D/E
PROGRAM
YPAO
ZONE 3
R L OPTICAL
USB
ZONE 2
AUDIO
VIDEO AUX
SILENT CINEMA S VIDEO VIDEO
PHONES
3 2 B C A 0 9
G H I F E D
8 7 6 5 4 1
Notes