ZyXEL Communications NWD-370N - Manual (Page 44)

ZyXEL NWD-370N User’s Guide
44 Chapter 4 Wireless Configuration
Figure 26 Confirm Save Screen
The following table describes the labels in this screen.
4.4 The Profile Screen
A profile is a set of wireless parameters that you need to connect to a wireless network. With a
profile activated, each time you start the NWD-370N, it automatically scans for the specific
SSID and joins that network with the pre-defined wireless security settings. If the specified
network is not available, the NWD-370N cannot connect to a network.
If you do not configure and activate a profile, each time you start the NWD-370N, the NWD-
370N uses the default profile to connect to any available network that has no security enabled.
Table 12 Confirm Save Screen
LABEL DESCRIPTION
Security Setting
Network Name
(SSID)
This field displays the SSID previously entered.
Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
device.
Network Mode This field displays the wireless standard (802.11b, 802.11g or 802.11n) used by the
selected wireless device.
Channel This field displays the channel number used by the profile.
Security This field shows whether data encryption is activated (WEP, WPA, WPA-PSK,
WPA2, WPA2-PSK, 802.1x) or inactive (DISABLE).
Back Click Back to return to the previous screen.
Save Click Save to save the changes back to the NWD-370N and display the Link Info
screen.
Exit Click Exit to discard changes and return to the Site Survey screen.