ZyXEL Communications NWD-370N - Manual (Page 43)

ZyXEL NWD-370N User’s Guide
Chapter 4 Wireless Configuration 43
The following table describes the labels in this screen.
4.3.2 Confirm Save Screen
Use this screen to confirm and save the security settings.
Table 11 Security Settings: IEEE 802.1x
LABEL DESCRIPTION
Authentication
Type
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
Password This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Certificate This field is only available when you select TLS in the Authentication Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Server CA Select a certificate authority (CA) that you trust and accept any certificates signed
by the CA.
Otherwise, select Trust Any to accept certificates from any CA.
PEAP Inner EAP This field is only available when you select PEAP in the Authentication Type
field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Back Click Back to go to the Site Survey screen to select and connect to another
network.
Next Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 4.3.2 on page 43 .
Exit Click Exit to return to the Site Survey screen without saving.