Zenith J3W41321A - Manual (Page 11)

11
ENGLISH
Y P
B
P
R
Y P B P R
To connect the TV to a DVD player/Satellite receiver
If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.
Rear of the TV
To S-Video OUT
Audio cord (not supplied)
To Audio OUT
S-Video cord (not supplied)
To S-VIDEO IN
To connect the TV to a DVD player with component video
If your DVD player has component video out jacks, connect your TV to a DVD player using a component video
cord. It can greatly enhance picture quality and performance.
Rear of the TV
To Component OUT To Audio OUT
Audio cord (not supplied)
Video cord (not supplied)
To AUDIO IN
To COMPONENT IN
NOTE:
This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component
video outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, “COMPONENT” will be
displayed on a black screen. If this screen appears, set the digital device’s component output to 480i.
Connections to other equipment (continued)
To connect the TV to a DTV receiver/set-top box
If you connect a DTV receiver/set-top box, connect your TV to it by using a component video cord.
To Component OUT To Audio OUT
Audio cord (not supplied)
Video cord (not supplied)
To COMPONENT IN
Rear of the TV
J3W41321A_En_P10-13 24/03/2006, 2:22 PM 11