Yamaha HTR-5490 User Manual

Page 50

REMOTE CONTROL FEATURES

CLEAR

Clearing Learned Functions,
Renamed Source Names, and
Setup Manufacturer Codes

Press an input selector button or Å to select
the area for which you want to clear the
name, function or manufacturer code.

Press CLEAR by using a ballpoint pen or
similar object.

Note

• If you do not press any button within 30 seconds during steps 2

and 3, the clearing process is canceled. If this happen, start over
from step 1.

Press u / d to select the clear mode.
The mode is shown in the display window in the
following order:

Press and hold CLEAR again for about 3
seconds.
“C:OK” appears in the display window.

Note

• “C:NG” appears in the display window if the operation is

unsuccessful. In this case, start over from step 2.

Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function or macro
for a button, the button reverts to the factory setting.

Note

• “ERROR” appears in the display window when pressing

buttons other than indicated in each step, or more than one
button at once.

PHONO

POWER

SLEEP

STANDBY

6CH INPUT

SYSTEM

V-AUX

D-TV/LD

VCR2/DVR

VCR 1

DVD

CBL/SAT

MD/TAPE

CD-R

TUNER

(L: name of a component) Clears
all learned functions for the
component area.

Clears all learned functions for
this unit control area.

Clears all learned functions.

Clears all renamed source names
in the display window.

Clears all programmed functions
including setup manufacturer
codes. This returns to the factory
settings.

TV VOL

PRESET

TV MUTE

TV VOL

SELECT

–

0108HTR5490_42-51_EN(UA)

01.7.6, 6:12 PM