ZyXEL Communications P841C - Manual (Page 28)

P841C Central-Side VDSL Modem
4-8 VDSL-Related Commands
FIELD DESCRIPTION EXAMPLE
vdsl auto upgrade NT
EEPROM flag This field shows the VDSL auto upgrade status (“on” or “off”).
When auto upgrade is on, the P841C will check the
subscriber’s modem VDSL version and automatically upgrade
it if it is an earlier version than the P841C’s. off
enet monitor flag This field shows the Ethernet monitor flag status (“on” or
“off”). If this flag is on and the link is up) the P841C display
P841C and the subscriber’s VDSL modem’s Ethernet
statistics. off
LT Ethernet speed This field shows the P841C Ethernet port speed. Auto
LT Ethernet full duplex flow
control This field shows the P841C Ethernet port flow control status
(“on” or “off”). on
NT Ethernet speed This field shows the P841 (subscriber’s VDSL modem)
Ethernet port speed. Auto
NT Ethernet full duplex flow
control This field shows the P841 (subscriber’s VDSL modem)
Ethernet port flow control status (“on” or “off”). on
vdsl disconnect count This field displays how many times VDSL connection has
been disconnected. 0
vdsl uptime This field displays how long the VDSL link has been up. 0 secs
4.1.13 VDSL Autoupg Command
vdsl autoupg [on|off]
Type this command to show the VDSL auto upgrade status (without “on” or “off”) or turn on/off auto upgrade.
When auto upgrade is on, the P841C will check the subscriber’s modem VDSL modem code version and
automatically upgrade it if it is an earlier version than the P841C’s.