ZyXEL Communications GS-3012 - Manual (Page 96)

Dimension GS-3012 Gigabit Ethernet Switch
10-4 Spanning Tree Protocol
Table 10-3 Spanning Tree Protocol: Status
LABEL DESCRIPTION
Port ID This is the priority and number of the port on the switch through which this switch must
communicate with the root of the Spanning Tree.
Topology Changed
Times This is the number of times the spanning tree has been reconfigured.
Time Since Last Change This is the time since the spanning tree was last reconfigured.
Poll Interval(s) The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Stop Click Stop to halt STP statistic polling.
10.2.1 Configuring STP
To configure STP, click the Configuration link in the Spanning Tree Protocol screen as shown next.
Figure 10-2 Spanning Tree Protocol: Configuration
The following table describes the labels in this screen.