ZyXEL Communications GS-3012 - Manual (Page 197)

Dimension GS-3012 Gigabit Ethernet Switch
Command Examples 29-1
This chapter describes some commands in more detail.
29.1 Overview
These are commands that you may use frequently in maintaining your switch.
29.2 show Commands
These are the commonly used show commands.
29.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and system up time).
An example is shown next.
Figure 29-1 show system-information Command Example
29.2.2 show hardware-monitor
Syntax:
show hardware-monitor [c|f]
This command displays the current hardware status (such as temperature and voltage levels).
Chapter 29
Command Examples
System Name : GS-3012
System Contact :
System Location :
Ethernet Address: 00:13:49:11:22:34
ZyNOS F/W Version: V3.60(HO.0)b1 | 01/21/2005
RomRasSize : 2891036
System up Time : 0:56:32 (52d1d ticks)
Bootbase Version: V3.00 | 01/14/2005
ZyNOS CODE : RAS Jan 21 2005 21:40:05
Product Model : GS-3012
GS-3012>