beautypg.com

Settings and displays – Bosch TCA5608 User Manual

Page 16

background image

14

Robert Bosch Hausgeräte GmbH

en

The temperature of the cup shelf (warming

function) is lower.

Switching to “

eco” mode starts an automatic

rinse cycle.

The appliance does not rinse if:

– no coffee was dispensed before it was

switched to “

eco” mode.

– steam was dispensed shortly before it

was switched off.

Note: The appliance is programmed so

that it switches to “

eco” mode automatically

after about 10 minutes. The default time can

be changed (see “Settings and displays”).

7 Steam generation button

h

Button

h

generates steam for foaming or

warming.

8 Steam dispensing dial

Hot water or steam can be dispensed by

turning the dial to hot water

g

or steam

h

.

To dispense steam, the steam generation

button

h

must be pressed first (see “Steam

for foaming milk”).

Settings and displays

Setting the water hardness

It is important that the water hardness be

set correctly, so that the appliance indicates

accurately when the descaling programme

should be run. The factory setting is a water

hardness of 4. You can check the water

hardness using the enclosed test strip or by

asking your local water supplier.
Degree Water hardness

German (°dH) French (°fH)

1

2

3

4

1­7

8­15

16­23

24­30

1­13

14­27

28­42

43­54

● Determine the water hardness with the

enclosed test strip.

e.g. Hardness = 2

S

on

Service:

Descale/clean appliance

S

flashing Service programme

in operation

9

on

Fill water tank

1, hold cup

+

8

flashing under nozzle

9 and turn

dial

8 to

g

/

h

8

flashing Turn dial

8 to

g

/

h

8

on

Turn dial

8 to “O

D

on

Empty trays

D

flashing Trays missing

4 Coffee dispensing button

4

Coffee can be brewed by pressing this

button.

Press once for one cup. The coffee is

ground, brewed and dispensed into the cup.

Button

4

flashes during this process.

Press twice within 3 seconds for two

cups. The coffee is ground, brewed and

dispensed into the cups (the grinding and

brewing process takes place twice). Button

4

flashes and

6

(2 cups) appears on the

display during this process.

i

If the coffee dispensing button

4

is

pressed again, the coffee brewing process

is terminated.

5 Coffee strength button

5

This button

5

is used to select the coffee

strength:

5

mild

55

medium

555

strong

The selected setting is shown on the

display.

6 eco button

The appliance can be put into “

eco” mode

or returned to normal mode with the

eco

button.

In “

eco” mode the appliance consumes less

energy.

All displays and buttons are dimmed,

only messages such as “Empty trays” are

displayed in the usual brightness.

This manual is related to the following products: