Yamaha htr-5890 - Manual (Page 56)

52
ADVANCED OPERATIONS
You can use the test tone feature to manually balance your
speaker levels. Please note that this operation will override
the level adjustments made in “AUTO SETUP” (page 26),
“Speaker level” (page 57) and “Manually adjusting
speaker levels” (page 51). Use the test tone to set speaker
levels so that the volume from each speaker is identical
when heard from your listening position.
You cannot activate the test tone if headphones are connected to
the PHONES jack. Remove the headphones from the PHONES
jack.
1
Set AMP/SOURCE/TV to AMP.
2
Press TEST.
The unit outputs a test tone.
3
Press k / n repeatedly to select the speaker
you want to adjust.
TEST LEFT Front left speaker
TEST CENTER Center speaker
TEST RIGHT Front right speaker
TEST SUR. R Surround right speaker
TEST SUR. B. R Surround back right speaker
TEST SUR. B. L Surround back left speaker
TEST SUR. L Surround left speaker
TEST SUBWOOFER Subwoofer
4
Press l / h to adjust speaker volumes.
5
Press TEST when you have completed your
adjustment.
If PRESENCE SP in SPEAKER SET is set to “YES”
(see page 56), proceed to step 6 to adjust the presence
speaker volumes.
If PRESENCE SP in SPEAKER SET is set to
“NONE”, the test tone stops.
6
Press k / n repeatedly to select the
speaker(s) you want to output the test tone.
TEST FRONT Front speakers
TEST PRESENCE Presence speakers
TEST PRES L Presence left speaker
TEST PRES R Presence right speaker
7
Press l / h to adjust the presence speaker
volumes.
8
Press TEST when you have completed your
adjustment.
The test tone stops.
y
• If you use a handheld SPL meter, hold at arms length and point
upwards so that the meter is in the listening position. With the
meter set to the 70 dB scale and to C SLOW, calibrate each
speaker to 75 dB.
• Before outputting the test tone, we recommend that you set the
output volume to 0 dB.
Using the test tone
Note
SET MENU
MENU
EFFECT
TEST
RETURN
ON SCREEN
DISPLAY
STRAIGHT
NIGHT
AUDIO
PURE DIRECT
ENTER
LEVEL
TITLE
A / B / C / D / E
VOL
+
–
CH
+
–
TV VOL
TV MUTE TV INPUT MUTE
+
–
AMP
SOURCE
TV
1
3,6
2,5,8
4,7
01EN00_HTR5890U.book Page 52 Thursday, December 23, 2004 12:39 PM