Xerox 1075 - Manual (Page 46)

Installing the Printer Driver and Software
40
2
Setting Up the PPD File
Preparation
Make sure that the machine is connected to an AppleTalk network before per-
forming the following procedure.
AAAA
On the Apple menu, select [Chooser].
BBBB
Click the [Adobe PS] icon.
CCCC
In the [Select a PostScript Printer:] list, click the name of the machine you want
to use.
DDDD
Click [Setup].
EEEE
Click the printer description file you want to use, and then click [Select].
The PPD file is set up, and the [Adobe PS] icon appears at the left of the ma-
chine name in the list. Next, follow the procedure on p.40 “Setting up op-
tions” to make the option settings, or close the [Chooser] dialog box.
Setting up options
AAAA
On the Apple menu, select [Chooser].
BBBB
Click the [Adobe PS] icon.
CCCC
In the [Select the PostScript Printer:] list, click the name of the machine you
want to use, and then click [Setup].
DDDD
Click [Configure].
A list of options appears.
EEEE
Select the options you want to set up and select the appropriate setting for
it.
Note
❒ If the option you want to set up is not displayed, the PPD file might not be
set up correctly. Check the name of the PPD file shown in the dialog box.
FFFF
Click [OK].
The list of options closes.
GGGG
Click [OK].
The [Chooser] dialog box appears.
HHHH
Close the [Chooser] dialog box.