Xerox C3000 - Manual (Page 58)

Transmission
48
1
A
Press [Scan Settings].
B
Make sure that [Scan Type] is selected.
C
Select the scan type you require, and then press [OK].
Note
❒ If you select [Text / Line Art], [Text / Photo], or [Photo], the transmission will
take longer than when [Text] is selected.
❒ If you send a fax document with [Text / Line Art], [Text / Photo], or [Photo] and
the background of the received image is dirty, reduce the density setting
and resend the fax.
❒ You can set the scan type that is selected right after the machine is turned
on or the {Clear Modes} key is pressed. See “Registering a priority function
using a program”.
Reference
p.58 “Density (Contrast)”
p.270 “Registering a priority function using a program”