Xerox Nuvera 120 - Manual (Page 7)

Xerox Nuvera™ 100/120 Digital Copier/Printer Customer Expectations Document
- 7 -
Optimum Product Performance
Print Volume Range
The Xerox Nuvera™ 100/120 Digital Copier/Printer is designed for a range of monthly print volumes.
System Average Monthly
Print Volume (AMPV)
Conditions
Xerox Nuvera™ 100/120
Digital Copier/Printer 100K – 500K 8.5 in x 11 in/A4
Maximum duty cycle: Up to 700K prints per month
Duty cycle is defined as:
The maximum monthly copy / print volume support under standard vendor supplied service (1X5 shift
coverage). This defines the upper end of expected customer volume band for the device.
The Customer should consider higher volume machines or multiple machines if average monthly volume
approaches duty cycle on a constant basis.
Prints between service calls on a digital mid-production system are dependent on customer requirements for
quality, volume, applications, and throughput material. Xerox Nuvera™ trained operators can optimize
performance output and help to minimize service calls.
Environmental Factors
Environmental Factor Minimum Maximum
Temperature 50 o F (10 o C)
(Tested to 60° F
(15.6 o C))
90 o F (32.2 o C)
(Tested to 80° F
(26.7 o C))
Humidity 15% RH
(Tested to 15%)
85% RH
(Tested to 80%)
Heat Emission (approximate)
- SFM /PM/ MFF 2,465 BTU / HR
(Standby)
17,537 BTU / HR
(Running)
Power Consumption (approximate)
- SFM/ PM/ MFF 0.723 kw
(Standby)
4.275 kw
(Running)
Noise
(Approximate sound pressure level at operator
position) 42.5 dBA
(Standby)
66.3 dBA
(Running)
Altitude (above sea level) 0 10,000 ft.
Nominal Voltage (Processor) 200 240