Xerox Nuvera 120 - Manual (Page 26)

Xerox Nuvera™ 100/120 Digital Copier/Printer Customer Expectations Document
- 26 -
Insertion Module (IM)
One inserter may be installed on the output side of the printer. The specifications for the Insertion Module
are the same as the 4-tray SFM (the 2-tray Large Format SFM is not available as an inserter), except as follows:
Item Xerox Nuvera™ 100/120 Digital
Copier/Printer Comments
Input Sizes • Tray 1 & 2:
7” x 10” to 9” x 12.6”
(178mm x 254mm to 228.6mm x 320mm)
Trays 3 & 4:
7.17” x 10.0” to 12.6” x 18.5”
(182.1mm x 254mm to 320mm x 469.9mm)
− A5 and Statement cannot be fed from
any of the trays in the Insertion
Module.
Tabs cannot be fed from the Insertion
Module to the MFF Finisher (tabs
orientation incompatibility between the IM
and the MFF).