ZyXEL Communications PLA-4xx Series - Manual (Page 55)

PLA-4xx Series User’s Guide
55
A
P P E N D I X
A
Product Specifications
The following tables summarize the PLA-4xx’s hardware and firmware features.
Table 11 Hardware Specifications
Dimensions (W x D x H) PLA-400/400 v2/402
112 (L) mm x 106 (D) mm x 28.5 (H) mm
PLA-470
162 (L) mm x 118 (D) mm x 40 (H) mm
Power Input 100 - 240 VAC, 50/60 Hz, 0.12 A
Ethernet Port Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
RESET Pressing this button in for less than 3 seconds resets the device to factory
default settings. Network Name becomes HomePlugAV.
Pressing this button in for more than 10 seconds resets the firmware to the
previous version.
ENCRYPT Pressing this button in for less than 3 seconds begins the connection setup
process.
Pressing this button in for more than 10 seconds resets the network name
to a random value.
Operation Environment Temperature: 0º C ~ 45º C
Humidity: 5% ~ 95% Noncondensing
Storage Environment Temperature: -10º C ~ 70º C
Humidity: 10% ~ 85% Noncondensing
Cabling Type PLA-400/400 v2/402/470
1 x Power Cord
PLA-400/400 v2/402
1 x LAN UTP Category 5 or Better
PLA-402
1 x Coaxial Cable
PLA-470
4 x LAN UTP Category 5 or Better
Network Interface PLA-400/400 v2/401/402/470
1 x 200 Mbps Powerline port compliant with HomePlug AV standard
PLA-400/400 v2/401/402
1 x 10/100M BASE-T Ethernet port with Auto MDI/MDIX
PLA-470
4 x 10/100 M Base-T Ethernet Ports with Auto MDI/MDIX
PLA-402
1 x Coaxial Cable Port