Xerox 555 - Manual (Page 25)

Introduction
WorkCentre Pro 555, 575 2-15
Operation Modes
Standby Mode
When the machine is in the Standby Mode, the display indicates the
machine status, a prompt for the next operation, or an error message.
The following information is displayed:
• Date and time — The month, day and time (hour and minute) are
displayed. Use the Menu Mode to set the date display sequence
and the time format.
•
Standby Mode Status — The Standby Mode Status indicates
the Reception Mode (“Auto Answer”, “Manual Answer”,
“TEL/FAX”, “FAX/TAD”). If “Reception Mode” is displayed, the
machine has completed the previous task and is ready to fax or
copy. If the Paper Tray becomes empty or open, the Standby
Mode Status is replaced with the Paper Tray status (Error
Message).
Enter Depart. code — if dept. code feature is enabled.
•
Free Memory — The percentage of remaining memory available
for storing documents is displayed. If no memory is used, 100% is
displayed.
Communication Mode
• Memory Send — Memory send communications are performed
in the background.
• Direct Send — The status of a Direct Send operation is
displayed.
•
Communication results — Results of a communication can be
printed. (Refer to the Advanced Features Guide.)
•
Communication error code — The result of an error in a
communication. (Refer to the Advanced Features Guide.)