Xerox 555 - Manual (Page 13)

Introduction
WorkCentre Pro 555, 575 2-3
Manual Group This feature allows the user to send a document to multiple
remote machines by simply pressing the Manual Group key
and entering the telephone numbers.
Batching This feature automatically performs transmissions of multiple
documents going to the same phone number. Documents
sent to the same location are transmitted with one phone call,
thus saving time and call connecting costs.
Refuse Junk mail With this feature selected, your WorkCentre only receives
from those remote units with phone numbers assigned to
your Speed Dial or One Touch phonebooks.
Receive to Memory Automatically stores up to 100 received documents to
available memory if the paper runs out or if a paper jam
occurs.
Collated Fax With this feature selected, incoming documents are received
to memory and then printed “last page first”.
This feature stacks the document with page 1 on top.
Super Power-Saver Mode This feature turns off areas of the machine, which have a
high power consumption.
Printer Power Saver Mode This feature turns off the printer fuser unit to reduce the
power consumption.
Optional Accessories The WorkCentre can be optioned with an additional paper
cassette, and a handset*.
ControlCentre ControlCentre is software package that can be loaded on a
PC. The ControlCentre software allows you to program most
of the machine settings using the PC, then write the settings
to the WorkCentre.
PC Printing With the Windows

Printer Driver installed on your PC and
the parallel print cable attached to the parallel port, the
WorkCentre can be used to print from the PC.
Feature Description
* Not available in all markets.