beautypg.com

Xantrex Technology XC1524 User Manual

Page 14

background image

Introduction

1–2

975-0187-01-01

Xantrex XC3012, XC5012, XC1524 and XC2524 Battery
Charger Features

The XC Series provides the following standard features:

three full current rated, independently controlled outputs which enable it to
charge three different batteries or battery banks. Each bank can be of a different
battery type, stage of charging, and temperature compensation

one battery temperature sensor (BTS) is included. Optional BTSs may be
purchased for the other two outputs, to provide complete optimal battery
charging to each battery or bank

battery monitoring functions while in float mode or rest mode

correct charging voltage for your batteries when connected to almost any single
phase AC power outlet in the world

invertable remote display panel which can also be removed from the charger
and mounted up to 20 m (65 ft) away for remote control and monitoring

The XC Series provides the following protection features:

true “fuseless” reverse polarity protection to guard against continuous reverse
battery polarity without charger damage

AC over voltage protection shutdown

over temperature protection shutdown

electronic current limiting for protection against short circuit on the unit’s
output

built-in protection against accidental connection to a higher battery voltage, up
to 24 VDC

battery temperature compensation to 0 °C (32 °F) (with BTS installed)

ignition protected rating, enabling installation in engine spaces

isolated design to reduce shock hazard

automatic charge resumption after AC power interruption

XC_Charger_Owner.book Page 2 Friday, August 12, 2005 3:23 PM

This manual is related to the following products: