Yamaha DSP-A595a - Manual (Page 19)

19
English
ADJUSTMENT METHOD
Adjustments should be made while watching the information on this unit’s display.
When adjusting with the remote control, set the
SELECTOR DIAL to the AMP/TUN or DSP position on the
remote control.
or
1
Turn the power on.
Front panel Remote control
or
2
Press SET MENU once or more to select the function
“CNTR” on the display.
Front panel Remote control
or
* After pressing SET MENU once on the remote control, you
can also select the function by pressing . (Pressing
goes back one selection.)
1
2
3 1 2 3
3
Press + or – once or more to select the setting you
want.
Front panel Remote control
or
4
Repeat steps 2 and 3 to change the settings for
“REAR”, “MAIN”, “BASS” and/or “M.LVL” in the same
way.
01DSP-A595a-2 6/24/99, 12:15 PM 19