Xerox Trimmer Module SquareFold - Manual (Page 21)

Problem solving
SquareFold Trimmer User Guide 17
Fault code Possible cause Recommended solution
If machine’s UI continues to reflect a fault/jam, open the
finisher and remove any jams. 1.
Follow the instructions shown on the machine’s UI to
resume printing/copying. 2.
Close the finisher cover(s). •
If necessary, power off/on the copier/printer. 3.
012 115
012 264
012 302 Finisher jam/fault
If fault persists, call for service. 4.