Xerox Trimmer Module SquareFold - Manual (Page 19)

SquareFold Trimmer User Guide 15
Problem solving
Fault code Possible cause Recommended solution
E221 E222
E223 E224
E225 E226
E227 E228
E229 E230
E231 E232
E233 E234
E235 E236
E237 E238
E239 E240
E241 E242
E243 E246 Jam or communication error with
the SquareFold Trimmer Module Power off/on the copier/printer. 1.
2. If fault persists, call for service.
E303
E101
E102
E103
E104
E105
E106 Jam/fault with the SquareFold
Trimmer Module Open the Top Left and Right Covers of the SquareFold
Trimmer Module.
If full, empty the container and reinsert it •
into the SquareFold Trimmer Module.
If the container is partially pulled out, push it
•
completely in.
1.
2. Carefully remove all sheets and paper scraps from jam
clearance areas.
Close the SquareFold Trimmer Module Top Left and Right
Covers. 3.
Check the Trimmer Waste Container: 4.
If machine’s UI continues to reflect a fault/jam, open the
finisher and remove any jams. 5.
Follow the instructions shown on the machine’s UI to
resume printing/copying. 6.
Close the finisher cover(s). •