Zoom Game Point! 4420 - Manual (Page 7)

Chapter 1: Installing the Game Point! 7
1
Installing the Game Point!
This chapter provides simple instructions for installing the Zoom
Game Point! in a home that has wireless networking. First, you
plug the Game Point! device into a computer to do a quick
setup, and then you plug the device into the Ethernet port of
your Xbox Live® or PlayStation®2. It’s fast and easy!
1111
Directly connect the Game Point! device to an Ethernet-
equipped computer that has a Web browser.
If your computer is connected to your network, change the
connection. To do this, plug one end of the Ethernet cable
into the Ethernet port on the back of the Game Point! and
plug the other end into the Ethernet port on the computer. If
the connection is via wireless, disable the wireless connection
using your wireless application software.
2222
Plug the included power cube into a “live” power strip or wall
outlet and then plug its other end into the Power jack on the
back of the Game Point!. Confirm that the Game Point! PWR
light goes on.
Important! Only use the power cube shipped with the Game Point!. Other
power cubes may damage the device.
3333
Change the TCP/IP Settings on the computer so that it uses
static IP addressing, and the IP address and subnet mask
shown on the next page. Be sure to make note of what the