Zoom Game Point! 4420 - Manual (Page 24)

24 Zoom Game Point! User Guide
3333
When a confirmation message appears, click OK to change the
operating mode. Another message will appear letting you know
that it may take a few moments while the unit resets itself and
changes mode. Click OK. (Once the unit reboots itself, you
will be prompted to log into the Web Management Interface
again.)
Using the LAN Settings Page
Use the LAN Settings page if you want to rename the Game
Point! device. By default, the Game Point! is set up to use a static
IP address (10.0.0.200) to access its Web Management Interface.
(Note to AdHoc Users -- You can also use the page to specify the LAN settings
for your Game Point! devices in an AdHoc network.)
To open the LAN Settings page, click LAN in the
left-navigational menu, then click LAN Settings.
To rename the Game Point! device
1111
[Optional] Enter a name for the Game Point!. By default, it is
named Game Point!.
2222
If you selected AdHoc mode, specify the IP address for the
Web Management Interface of the Game Point!.
3333
Keep the default subnet mask of the unit 255.255.255.0.
4444
Click the Save Changes button.