Zoom Game Point! 4420 - Manual (Page 10)

10 Zoom Game Point! User Guide
15 15 15 15
Connect the Game Point! to your Xbox or PlayStation®2.
First unplug the Game Point’s power cube from the power
strip or wall outlet and disconnect the Game Point’s
Ethernet cable from the Ethernet port of the computer
you used to configure it. Then connect the Game Point! to
the Ethernet port of the gaming device and plug the Game
Point’s power cube into a “live” power strip or wall outlet
near this gaming device. Confirm that the Game Point!
PWR light goes on.
16 16 16 16
You may want to try to position the unit’s antennas to
improve wireless speed and coverage. Typically the
antennas should not be parallel. For example, try making
one vertical and one horizontal.
17 17 17 17
Restore the network connection for the computer you
used to set up Game Point!:
• If the connection is via Ethernet, plug the Ethernet
cable back in to your computer.
• If the connection is via wireless, enable the wireless
connection using your wireless application software.
Congratulations! Your Game Point! is installed as an Ethernet
client, and your gaming device should be able to wirelessly connect
to the wireless network you specified.