Yamaha CDX-490 - Manual (Page 9)

DIRECT PLAY
Select a desired track using the numeric button.
Example: To select track 25
Press
➀ twice, then immediately press ➁ once.
* If a track number higher than the highest track number on
the disc is selected, the last track on the disc will be
played.
Caution
When the disc tray is open, do not touch the inside gear
wheel. If you touch the gear wheel, your finger may be
caught in the closing tray and injured.
SKIP PLAY
To play from the beginning of the track following the one now
playing
To play from the beginning of the track now playing
To play from the beginning of the track before the one now
playing
(twice)
• These operations can also be performed when the unit is in
the pause or stop mode.
•
CDX-890 only
If the button is pressed and held, the track number is
continuously changed to higher numbers (or lower numbers).
• CDX-590 and CDX-490 only
When using the SKIP button on the remote control
transmitter:
If the button is pressed and held, the track number is
continuously changed to higher numbers (or lower
numbers).
When using the SKIP/SEARCH button on the front panel:
Be careful not to press and hold the button, otherwise the
selected track is played forward (or backward) rapidly.
English
9
To resume play, press the PAUSE button again (or press the
PLAY button).
* The PLAY/PAUSE button on the front panel can also be
used to stop play temporarily or to resume play.
To stop play temporarily To stop play completely
To play a desired track on the disc
PAUSE STOP
5 SKIP
+ I0 5
1 2 3 4 5 6 7 8 9
SKIP
SKIP
The selected track
number is displayed
➀ ➁
Gear wheel