Yamaha MOTIF XS7 EN - Manual (Page 118)

Editing a Normal Voice
MOTIF XS Owner’s Manual 118
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance
mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
BPF6
The combination of a -6 dB/oct HPF and LPF.
BPFw
A 12 dB/oct BPF that combines HPF and LPF filters to allow wider
bandwidth settings.
BEF (Band Elimination Filter)
When this Filter Type is selected, you can set the Cutoff
Frequency around which the audio signal is muted or
eliminated. The Band Elimination Filter has an opposite
effect on the sound compared to the Band Pass Filter.
BEF12
BEF6
Dual Type Filter
This type is a combination of two same filter types. You can
edit the distance between the two Cutoff Frequencies.
Dual LPF
Two 12 dB/oct low-pass filters connected in parallel.
Dual HPF
Two -12 dB/oct high-pass filters connected in parallel.
Dual BPF
Two -6 dB/oct band-pass filters connected in parallel.
Dual BEF
Two -6 dB/oct band-elimination filters connected in parallel.
Combination Type Filter
This type is a combination of two different filter types. You can
edit the distance between the two Cutoff Frequencies.
LPF12+HPF12
A combination of a -12 dB/oct low-pass filter and high-pass filter. When
this Filter Type is selected, HPF Cutoff (
)) and HPF Key Follow
Sensitivity ( !) can be set. Only the LPF graph is shown on the display.
LPF6+HPF6
A combination of a -6 dB/oct low-pass filter and high-pass filter. When
this Filter Type is selected, HPF Cutoff (
)) and HPF Key Follow
Sensitivity ( !) can be set. Only the LPF graph is shown on the display.
LPF12+BPF6
A combination of a low-pass filter and band-pass filter. You can edit the
distance between the two Cutoff Frequencies.
2 Cutoff*
Determines the Cutoff Frequency for the Filter, or the
central frequency around which the Filter is applied. The
tonal characteristics of the Voice and function of the Cutoff
Frequency differ depending on which Filter type is
selected. Set this parameter while confirming the Filter
graph shown on the display.
Settings: 0 – 255
3 Cutoff Velocity Sens
(Cutoff Velocity Sensitivity)
Determines how the Cutoff Frequency ( 2) responds to
velocity, or the strength with which you play notes. For
positive settings, the more strongly you play the keyboard,
the higher the cutoff frequency becomes. A setting of 0 will
cause the Cutoff Frequency not to change no matter what
velocity. Negative settings will cause the Cutoff Frequency
to rise the more softly you play the keyboard.
Settings: -200% – 0% – +200%
Level
Resonance ( 4)
Frequency
Cutoff range Cutoff range
Range passed
Level
Width ( 4)
Frequency
Cutoff range Cutoff range
Range passed
Cutoff
Frequency
Cutoff
Frequency
Cutoff
Frequency
Level
Range passed Cutoff range
Cutoff Frequency
Frequency
Range passed
Level
Frequency
Distance ( 9)
Cutoff Frequency ( 2) Cutoff Frequency
Only the lower cutoff frequency is set
directly on the display.
Cutoff range Range passed
Level
Frequency
Distance ( 9)
Cutoff Frequency ( 2) Cutoff Frequency
Only the lower cutoff frequency is set
directly on the display.
Cutoff range Range passed
Level
Frequency
Distance ( 9)
Cutoff Frequency ( 2) Cutoff Frequency
Only the lower cutoff frequency is set
directly on the display.
Cutoff range Range passed