ZyXEL Communications G-162 - Manual (Page 43)

ZyXEL G-162 User’s Guide
Using the ZyXEL Utility 3-17
Figure 3-10 Profile: Select a Channel
The following table describes the labels in this screen.
Table 3-10 Profile: Select a Channel
LABEL DESCRIPTION
Channel Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Step 3.
If you select Infrastructure network type in the first screen, select WEP, WPA-PSK, WPA or
802.1x from the drop-down list box to enable data encryption. If you select Ad-Hoc network
type in the first screen, you can only use WEP encryption method. Otherwise, select Disabled
to allow the G-162 to communicate with the access points or other peer wireless computers
without any data encryption and skip to Step 5.