Xantrex Technology PV225S-480-P - Manual (Page 56)

Installation
3–8 152606
Figure 3-7 Transformer Access Panels
Figure 3-8 Inductor Access Panels
Transformer Access Panel
To Remove the Access Panel :
Loosen and remove the 1/4"
self-tapping sheet metal screws
(x9).
To Replace the Access Panel :
Replace and tighten the 1/4"
self-tapping sheet metal screws.
Inductor Access Panel
To Remove the Access Panel :
Use a Phillips screwdriver to loosen
and remove the 1/4-20 Phillips
round-head bolts (x12).
To Replace the Access Panel :
Replace and tighten the 1/4-20
Phillips round-head bolts to 78 in-lb
(8.6 nm).
Main Inverter Front Door