Cleaning un der the sen sor bracket 37 – Zebra Technologies Printers User Manual

Page 45

background image

Cleaning Under

the Sensor Bracket

The transmissive (gap) sensor guide bar bracket

can pivot up for easy cleaning.

Step 1

Open the print head carriage.

Step 2

Open the sensor bracket. Pull the slide lock to

the left and lift the front of the bracket up.

Step 3

Clean the metal part of the bracket, only. The

sensor is recessed to protect it from labels and

adhesive.

Clean the clear sensor window below the sensor

bracket. Do not use abrasive cleaning materials.

Only use water on a lint free, clean, damp cloth

very lightly moistened. Let dry. Verify that the

window is clear of streaks and clouding.

Step 4

Swing the sensor bracket down to close. The

slide lock will automatically lock when in posi-

tion.

Close the print carriage.

980181-001 Rev.C

37

Operation

Transmissive (Gap)

Sensor Bracket

Slide Lock