Wyse Technology WintermTM 9000 - Manual (Page 27)

7
Note
The administrator may create additional user accounts by using the User
Manager utility available through the Control Panel. However, due to local
memory constraints, the number of additional users should be kept to a
minimum. See “User Log on Accounts” for instructions.
Automatically Launched Utilities
Write Filter
Upon system boot the write filter utility is automatically launched. The write filter provides
security and protects the flash memory from excessive write activity. The active/inactive
status of the write filter is indicated by the color of the button in the system tray on the
desktop task bar. See “Write Filter” in “Utilities and Settings” for information about the write
filter.
Note
Changes made to the terminal configuration will be lost when the terminal is
rebooted unless the write filter cache is flushed during the current boot
session. See “Write Filter” in “Utilities and Settings” for instructions on how to
flush the cache.
NetXClean
Upon system boot the NetXClean utility is automatically launched. NetXClean is a cleanup
utility that keeps extraneous information from being stored on the local disk. See
“NetXClean” in “Utilities and Settings” for information about this utility.
VNC Server
Upon terminal log on the Windows VNC Server utility is automatically launched. VNC
allows the terminal’s desktop to be accessed remotely for administration and support.
Refer to “WinVNC” in “Remote Administration and Firmware Upgrades” for information
about VNC.
Time Synchronization Utility
Upon log-in the dialog box for a time synchronization utility briefly displays. This feature
may be defeated by the administrator (locally or remotely) if desired.