Wyse Technology WintermTM 9000 - Manual (Page 23)

3
Virtual Network Computing (VNC) Viewer
VNC Server is factory-installed on your terminal and is by default automatically launched
on log-on. It allows the terminal to be operated/monitored (“shadowed”) from a remote
machine on which VNC Viewer is installed, primarily for troubleshooting and support
purposes. The administrator may open a VNC Server dialog box that allows the password
to be changed and properties to be set. An administrator wanting to shadow your terminal
must run the VNC Viewer component on the remote machine (accessed either from the
Rapport Remote Administration software or from a separate installation). The
administrator using the VNC Viewer must know the password to the server component on
your machine as well as your machine’s IP address or valid DNS name. Refer to
“WinVNC” in “Remote Administration and Firmware Upgrades” for information about VNC.
Model Summary
Note
Terminal data sheets, the product registration form, and information about
Rapport Remote Administration Software are available through the Wyse
Web site,
http://www.wyse.com .
Model 9235LE
Model 9235LE is a small-footprint, modular XPE-based terminal (see Figure 1). The
connections for power, the network, a monitor, and a keyboard are on the back panel of
the terminal (the mouse plugs into the keyboard). The power push-button switch is on the
top of the unit.
Figure 1 Model 9235LE Terminal