Watlow Electric RUI/Gateway User Manual
Page 19
RUI/Gateway & Modbus
®
TCP
Configuration & Programming Example
Using KEPServerEX 4.0
Watlow
1241 Bundy Blvd
Winona, MN 55987
Telephone: 507-494-5656
© 2008 Watlow Electric Mfg Co 19
FM 4/08
39. The address shown above represents pointer 12 as shown in the EZ-ZONE
®
PM
Communications user manual under the sub-heading of “User Programmable Memory
Blocks”.
Again, focus on the address below. This particular address represents the Assembly Working
Address for pointer 12.
40. Now that the tags are created execute the OPC quick client as illustrated in step 33. Once
running, click on the tag created to modify the assembly. In this case, “New Assembly -
Pointer 12”. Based on the “Description” field in the screen shot in step 38 and 39 pointer 12
will become the Idle Set Point of PM1 once changed. The value to be written below reflects
this.