Watlow Electric RUI/Gateway - Manual (Page 15)

RUI/Gateway & Modbus ® TCP
Configuration & Programming Example
Using KEPServerEX 4.0
Watlow
1241 Bundy Blvd
Winona, MN 55987
Telephone: 507-494-5656
© 2008 Watlow Electric Mfg Co 15
FM 4/08
said, look closely at the addresses given in defining the CLSP for each of the four PM
controls.
33. In the screen shot above we now see a series of inputs and outputs that have been
configured within KEPServerEX. To test the live and active connection using this software,
simply click on the OPC quick client icon where the “Value” column shown below allows for
active reading and writing to each of the PM controls on Standard Bus.