Denon DN-S3500 - Manual (Page 14)

8
ENGLISH
ENGLISH
3
Track search start
r When the CUE button is
pushed after selecting
the track, current
playback continues as
the next track is
searched for and the
standby mode is set.
When the standby
mode is set, the CUE button lights up and
the PLAY/PAUSE button flashes.
• During this time, if a loop of 6 seconds or
less is actively looping, it will continue to
loop until PLAY is ultimately pressed.
If a loop is over 6 sec, you must first EXIT
from the loop in order to enter Next Tr
mode.
• The time display indicates the remaining
playback time for data in the memory
after CUE is pressed.
NOTE:
The amount of time for which playback of
the currently continuing track can be
continued is a maximum of 10 seconds
from the time searching for the next track
starts.
CUE
4
5
Next Track cross fade
✽ The currently playing track can be faded
out when starting to play a different track.
The fade out time can be selected at ⁄5
PRESET “(3) Next Track”.
• If the PLAY/PAUSE button is not pushed
after standing by at the next track,
playback of the next track starts once all
of the currently playing playback data has
been played.
Next Track playback start
t When the PLAY/PAUSE
button is pushed, the
current playback is
stopped and playback
of the next track starts.
6 NEXT TRACK
• It’s now possible to select the beginning of the next track to be played while continuing playback of the current
track without interrupting playback.
*Crossfade can also be used for a smooth transition.
1
2 -1
Enter Next Track mode
q When the NEXT TRACK
button is pushed during
playback, the NEXT TRACK
function is turned on.
• When this mode is set,
CUE button blink.
• When the button is pushed again, the
NEXT TRACK mode is turned off.
Select the track
w Turn the PARAMETERS knob and select for
the next track to be played.
NEXT TRACK
TRACK SEARCH
PARAMETERS
PUSH ON/OFF
2 -2
Select the MEMO
(Next track Memo function)
e The CUE point of MEMO can be selected
as the NEXT TRACK start point.
• When the NEXT TRACK happens to be
one where a MEMO has been previously
memorized, the MEMO indicator lights
up.
• If the MEMO button is pushed at this
time, the CUE point is memorized as the
NEXT TRACK & point to be selected.
• The MEMO will be canceled if another
track is selected by the PARAMETERS
knob or the MEMO button is pushed
again.
NOTE:
MP3 files with Memo’s are not supported
for this function.
T T
T
ET
O
ECHO/LOOP
FLANGER
FILTE L L R
BRAKE
CUE
EJECT DISC
r, i
t
e
PARAMETER P P S PUSH ON/OFF
EVERSE
PITCH
RANGE
KEY ADJUST
F F H
MODE FILE SEARCH
RELAY A A
CONT. T T
q, y
w, u
6
Next Track Auto mode
y When the NEXT TRACK
button is pushed during
playback, the NEXT TRACK
function is turned on.
u Press the PARAMETERS knob for 2 secouds,
then the NEXT TRACK AUTO mode is set.
Playback mode is set to the CONT. mode.
i When the CUE button is pressed, the NEXT
TRACK AUTO mode is started.
In the NEXT TRACK mode, the NEXT TRACK
button flashes.
NOTE:
If Playback is interrupted during this mode
by Pause, Cue, Hot Start or track change,
the Next Tr Auto Mode is cancelled and
normal playback resumes.
NEXT TRACK