Weider WESY41080 - Manual (Page 14)

27. Find the Press Cable (88)Ñthis is the longest
Cable. Attach the end of the Press Cable (88) to the
Large ÒUÓ Bracket (84) with a 1/4Ó Nylon Locknut (44)
and a 1/4Ó Washer (37). Do not completely tighten
the Nylon Locknut. It should be threaded onto the
end of the Cable so only a couple of threads are
showing above the Nylon Locknut, as shown in
the inset drawing.
28. Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82). Attach the Pulley and a Cable Trap (80) to the
indicated bracket on the Press Base (13) with a 3/8Ó x
2Ó Bolt (50) and a 3/8Ó Nylon Locknut (42). Make
sure the Cable Trap is turned to hold the Cable in
place.
29. Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82). Attach the Pulley and a Cable Trap (80) to the
other bracket on the Press Base (13) with a 3/8Ó x 2Ó
Bolt (50) and a 3/8Ó Nylon Locknut (42). Make sure
the Cable Trap is turned to hold the Cable in
place.
14
27
28
29
88
37
84
44
88
50 13
82
80
42
50
88
82
80
42
13
44
37
84
88