Panasonic DMP-BDT210 - Manual (Page 37)

Re
fe
re
n
c
e
37
VQT3B75
Disc cannot be played.
¾ The disc is dirty. (> 4)
¾ Check the region code. (> 7)
Still pictures (JPEG) do not playback
normally.
¾ The images that were edited on the PC, such as
Progressive JPEG, etc., may not playback.
I can’t playback BD-Live.
¾ The SD card is write-protected. (> 7)
¾ Confirm that this unit is connected to the broadband
Internet. (> 11)
¾ Confirm the “BD-Live Internet Access” settings. (> 30)
¾ Confirm an SD Card is inserted into the SD Card slot.
(> 16)
I can’t connect to the network.
¾ Confirm the network connection and settings.
(> 11, 13, 33)
¾ Check the operating instructions for each device and
connect accordingly.
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾ Higher transfer rate router such as 802.11n (2.4 GHz or
5 GHz) Wireless router may solve the problem. If you
use 802.11n (2.4 GHz or 5 GHz) Wireless router, it is
necessary to set the encryption type to “AES”.
Simultaneous use with a microwave, cordless telephone
etc. at 2.4 GHz may result in connection interruptions or
other problems.
¾ On the “Wireless Settings” screen (> 33), the
continuous lighting of at least 4 “Reception” indicators is
the target for a stable connection. If 3 or fewer indicators
are lit or the connection is being interrupted, change the
position or angle of your Wireless router and see if the
connection state improves. If there is no improvement,
connect to a wired network and perform the “Network
Easy Setting” (> 13) again.
Playback Network
DMP-BDT310_110EB-VQT3B75.book 37 ページ ２０１１年２月２１日 月曜日 午後５時１７分