Panasonic DMP-BDT210 - Manual (Page 16)

16
VQT3B75
STEP 6 :
Reprogramming the
remote control
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (> 34, “Remote Control”)
You can operate the TV using the unit’s remote control.
1
Input the 2-digit code (> 40) with the
number buttons while pressing [Í TV].
e.g., 01: [0] B [1]
2
Test by turning on the television.
≥ If your television brand has more than one code listed, select the one
that allows correct operation.
Playback
Inserting or removing
media
≥ When inserting a media item, ensure that it is facing the
right way up.
≥ When removing the SD card, press on the centre of the
card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be displayed on
the connected equipment. For details, refer to the
instructions for the connected equipment.
For other Panasonic products
For TV
SD CARD
CALL
[BDT310]
[BDT210]
DMP-BDT310_110EB-VQT3B75.book 16 ページ ２０１１年２月２１日 月曜日 午後５時１７分