Maintenance-batteries – Windsor VOYDU1 User Manual
Page 28
![background image](/manuals/223352/28/background.png)
MAINTENANCE-BATTERIES
86292490 VOYAGER DUO 08/20/07
4-5
6. Replace the battery caps, and leave them in
place while charging.
7. Unplug the machine connector from the battery.
FOR SAFETY: When charging, connect the
charger to the batteries before connecting the
charger to the AC wall outlet. Never connect the
charger to the AC wall outlet first. Hazardous
sparks may result.
8. Plug the charger connector into the battery
connector. Connect the charger AC plug to a
wall outlet. The charger gauge should indicate
that the batteries are charging.
9. When the batteries are fully charged, disconnect
the charger from the AC wall outlet, then
disconnect the charger from the batteries.
10. Connect the machine to the battery connector.
11. Check the electrolyte level. It should be up to
the indicator ring. If necessary, add distilled
water.
12. Lower recovery tank by safely disengaging the
prop rod latch and slowly lowering. Replace the
hose and “Y” tube connection. Replace front
cover.
CHANGING BATTERIES
Stop the machine in a clean area next to the
charger. Turn off machine.
FOR SAFETY: Before leaving or servicing the
machine; stop on level surface, turn off machine
and remove key.
1.
Disconnect machine from battery pack.
2.
Raise recovery tank and engage prop rod latch.
3.
Disconnect main positive lead and secure cable
terminals away from batteries.
4.
Loosen both terminals on each jumper cable
and remove one at a time.
5.
Prepare a suitable site to place the batteries.
6.
Attach suitable battery lifting device and lift
batteries from the machine.
Batteries are a potential environmental hazard.
Consult your battery supplier for safe disposal
methods.
++
RED
BLK
RED
BLK
RED
BLK
+
-
-
-
REAR OF
MACHINE