Windsor VOYDU1 - Manual (Page 19)

MACHINE OPERATION
86292490 VOYAGER DUO 08/20/07 3-11
PRE-RUN MACHINE INSPECTION
Do a pre-run inspection to find possible problems
that could cause poor performance or lost time from
breakdown. Follow the same procedure each time to
avoid missing steps.
NOTE: See maintenance section for pre-run
machine inspection checklist items.
STARTING MACHINE
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make
sure that all safety devices are in place and
operating properly.
1. Turn the machine power on by turning key
switch clockwise to the “I” (on) position.
2. Check the position of the Reverse Button to
make sure the machine will travel in the direction
intended.
3. Check the position of the speed control knob to
make sure the machine will travel at the
intended speed.
4. Press either throttle Switch.
EMERGENCY STOP PROCEDURES
1. Release both the throttle switches.
2. Turn machine power off with key switch by
turning key switch counterclockwise to the “o”
(off) position.
DELUXE
1. Release both the throttle switches.
2. Turn machine power off with key switch by
turning key switch counterclockwise to the “o”
(off) position.
3. Push E-Stop button in.
4. To reset the E-stop button, rotate counter
clockwise and the switch will pop back out.