Westell Technologies Router 2400 - Manual (Page 7)

030-300331 Rev. A 5 October 2002
4-Port Router (Model 2400) User Guide
4.2 Installation Requirements
To install the Router, you will need the following:
• A Network Interface Card (NIC) installed in your PC or
• An available USB port
NOTE: Please wait until you have received notification from your service provider that your DSL line has been
activated before installing the Router and software.
4.3 Before you begin:
Make sure that your kit contains the following items:
• Westell 4-Port Router (Model 2400)
• Power Supply
• RJ-45 Ethernet cable
• USB cable
• RJ-11 Phone cable
• Westell CD-ROM containing USB software drivers
and User Guide in PDF format
• Quick Start Guide
Microfilters
ADSL signals must be blocked from reaching each telephone, answering machine, fax machine, computer modem
or any similar conventional device. Failure to do so may degrade telephone voice quality and ADSL performance.
Install a microfilter if you desire to use the DSL-equipped line jack for telephone, answering machine, fax machine
or other telephone device connections. Microfilter installation requires no tools or telephone rewiring. Just unplug
the telephone device from the baseboard or wall mount and snap in a microfilter, next snap in the telephone device.
If your kit did not include microfilters, please contact your ISP or Westell to obtain a microfilter kit, which contains
multiple microfilters for your installation.