2 label stock specifications, 3 ribbon specifications, Led and button operation – Wasp Bar Code Wasp WPL305 User Manual
Page 17
2D: PDF-417, Maxicode, and DataMatrix.
Command Set
WPL
Environment
Operation
Temperature: 5 ~ 40 .
Relative Humidity: 25% ~ 85% (Non Condensing).
Storage
Temperature: -40 ~ 60 .
Relative Humidity: 10% ~ 90% (Non Condensing).
7.2 Label Stock Specifications
Item Specification
Type
Label (Continuous , Die-cut , Fan-fold).
Wound Type
Outside wound.
Width
20mm ~ 112mm (0.78” ~ 4.4”).
Length
10mm ~ 1000mm (0.4” ~ 39”).
25.4mm ~ 1000mm (1” ~ 39”).(for peeler and cutter)
Thickness 0.06mm
~
0.19mm.
(2.3~7.4 mil), max. 150g/m
2
Roll Diameter
5”.
Roll Core Diameter
25.4mm ~ 76.2mm (1” ~ 3”).
Gap Height
2mm min.
Black Mark Height
2mm min.
Black Mark Width
8mm min.
7.3 Ribbon Specifications
Item Specification
Type
Wax, Wax / Resin, Resin.
Core Diameter
1".
Width Max
110mm.
Capacity
300m with 1" core.
Wound Type
Outside wound.
Ribbon End
Clear or silver end tape.
7.4. LED and Button Operation
LEDColor Description
Green
Orange
Red
The power is on and the device is ready to use.
The system is detecting the paper and ribbon status.
Printing error, such as paper empty, ribbon empty,
cover opened, etc.
15