Wasp Bar Code Wasp WPL305 - Manual (Page 15)

The printer is paused. 3.
4.
Press the feed button to resume printing.
The printer is out of label or ribbon or the printer settings are not
correct
Out of label or ribbon
Load a roll of labels and follow the instructions in Loading the Labels,
then press the feed button to resume printing.
Load a ribbon and follow the instructions in Loading the Ribbon then
press the feed button to resume printing.
Printer setting is not correct
Initialize the printer by following the instructions in Power on
Utilities.
6.2 Print Quality
Continuous feeding labels
The printer settings may be wrong. Please do the Initialization and
Gap/Black Mark Calibration.
No print on the label
Is the label or ribbon loaded correctly? Follow the instructions in
Loading the Labels or Loading the Ribbon.
Has the ribbon run out? Follow the instructions in Loading the
Ribbon.
Poor print quality
Top cover is not closed properly. Close the top cover completely and
make sure the right side and left side levers are latched to the top
cover properly.
Clean the thermal print head.
Adjust the print density setting.
Ribbon and paper media are not compatible .
13