Wasp Bar Code Wasp WPL305 - Manual (Page 14)

5. Maintenance
5.1 Cleaning
Use one or more of the following supplies that meets your needs:
Cleaning pens
Cleaning swabs
Lint-free cloth
Printer Part Method
Printer Head Let the print head to cool for one minute.
Use a cleaning pen to swab the print elements.
Platen Roller Rotate the platen roller and wipe it thoroughly
with 70% alcohol and a cleaning swab, or
lint-free cloth.
Exterior Wipe it with water-dampened cloth.
Interior Brush or air blow.
6. Troubleshooting
This section lists common problems and some suggested solutions. Problems
are indicated by the LED light pattern.
6.1 LED Status
LED Status / Color Printer Status Solution Number
Off off 1
Solid Green on 2
Blinking Green Pause 3
Blinking Red Stopped 4
No power. 1.
2.
Turn on the power switch.
Check if the green LED is lit on the power supply. If it is not on, the
power supply may be broken.
Check both power connection from the power cord to the power
supply and from the power supply to the printer power jack.
The printer is on and ready to use.
No action necessary.
12