beautypg.com

Whirlpool RBS277PD User Manual

Page 46

background image

46

CAUSE

The oven is not level. (See Installation Instructions.)

The oven temperature seems too low or too high. See
“Adjusting the oven temperature control” on page 18 to
adjust oven temperature.

You did not preheat the oven before baking (if called for
in recipe).

The recipe you are using may need to be altered to
improve the taste or appearance of the food.

You are using a pan that is not the correct type or size.
Refer to a reliable cookbook or recipe for recommended
pan type and size.

There is not enough air space around pan when baking.
Allow 1

1

2

to 2 inches (4-5 cm) of air space on all sides of

pan. There must be a minimum space of 1 inch.

There has been a power failure. Reset the clock.
(See page 9.)

Press the Off/Cancel pad. If the code reappears, note the
code and call for service. (See Step 2 on page 47.)

PROBLEM

Cooking results are not
what you expected

The display is showing
“PF”

“F” followed by a
number shows on the
display

If none of these items was causing your problem, see “Requesting Assistance or Service”
on page 47.

T R O U B L E S H O O T I N G