Press stop time pad. 7. set stop time, Complete entry, When start time is reached – Whirlpool RBS277PD User Manual
Page 32: When cooking is done
32
PRESS
YOU SEE
START
ENTER
5 SEC
ON
BAKE
DELAY
6. Press Stop Time pad.
7. Set stop time.
Press the “up” (
▲
) or “down” (
▼
) pad(s)
until the correct time shows on the
display.
Example at right shows a desired
stop time of 2:30. This provides a
30-minute cook time (the difference
between the start and stop times).
8. Complete entry.
NOTES:
•
You can change the temperature or
time settings any time after pressing
the Start/Enter pad by repeating Steps
2 through 7.
•
The display will show “door” and the
heating elements will not heat if the
door is open when you try to cook
with bake/roast or convection cook.
9. When start time is reached:
A 1-second tone will sound. The dis-
play will count down the cooking time
in hours and minutes (if cook time is
more than 1 hour) or in minutes and
seconds (if cook time is less than
1 hour).
10. When cooking is done:
The oven will turn off automatically and
beep four times. You will also hear four
1-second tones every minute (unless
they have been disabled [page 11]) until
you press the Off/Cancel pad.
PRESS
YOU SEE
HR
MIN
F
BAKE
STOP
TIME
(example shows 2:30 stop time)
(display counts down cook
time)
YOU SEE
TIME
COOK
PRESS
YOU SEE
STOP
TIME
F
BAKE
STOP
TIME
ON
F
BAKE
HEAT
D
TIME
TIME
COOK
YOU SEE
U S I N G Y O U R O V E N